System information

Get Complete Collection of HP2-T26 Exam's Question and Answers.

http://www.Test4Prep.com

Question: 193

You are preparing to replace a system board on a BL680c. What should you do first?

A. Remove the disk drive cage.

B. Remove the cover.

C. Remove the processors.

D. Connect the ESD strap.

Answer: D

Question: 194

The customer replaced a server blade that had been backed up to an Ultrium 448 Tape Drive. How

should you restore the server blade and have it fully functional?

A. During POST, you select F9 to restore from tape.

B. You power up the server blade and hold down the One-Button Disaster Recovery (OBDR) button.

C. You insert the tape that has the backup of the server, then power up the blade.

D. You power up the blade and select F9 during POST to enter into the RBSU. In the RBSU, you select

Restore from tape

Answer: B

Explanation:

Reference:

http://www.dectrader.com/docs/set2/c01309761.pdf

Question: 195

How can you access the RBSU to verify Advanced Processor settings? (Select two.)

A. Press F9 during POST.

B. Press F12 during POST.

C. Use Windows RBSU Configuration Utility.

D. Use HP Insight Diagnostics Offline Edition.

E. Use BIOS USB Console.

F. Use BIOS Serial Console.

Answer: A, F