User guide

4-10 Compaq StorageWorks RAID Array 4100 User Guide
5. Squeeze the tabs on either side of the GBIC , then remove the GBIC
by pulling it straight out of the RA4000 Controller
.
1
2
2
3
1
2
2
3
Figure 4-12. Removing the Fibre Channel cable and GBIC
6. Squeeze the latches and pivot open the two ejector levers securing
the RA4000 Controller.
7. Remove the RA4000 Controller by pulling it straight out of the
chassis
.
1
1
2
3
Figure 4-13. Removing the RA4000 Controller
8. Install the replacement RA4000 Controller by inserting it into the tracks
in the rear panel opening.