User guide

4-2 Compaq StorageWorks RAID Array 4100 User Guide
Figure 4-1. Drive Failure LED
If any Drive Failure LED appears amber, replace that drive as soon as
possible. See “Replacing Components” later in this chapter for important
information on when it is safe to replace drives.
Fibre Host Adapter LEDs
The Fibre Host Adapter has two status LEDs. The Transmit LED indicates
that the Fibre Host Adapter is transmitting data over the Fibre Channel
Arbitrated Loop (FC-AL). The Receive LED
indicates that the Fibre Host
Adapter is receiving data.
1
2
Figure 4-2. Fibre Host Adapter/P LEDs