User guide

2-2 Compaq StorageWorks RAID Array 4100 User Guide
■ GigaBit Interface Converter (GBIC) modules (Two GBICs are required
for each Fibre Channel cable installed.)
 Short-wave GBIC option kit for use with multi-mode cables
(part number 234459-B21)
NOTE: Two Short-wave GBICs are provided with each RA4100 and Fibre Host
Adapter.
 Long-wave GBIC option kit for use with single-mode cables
(part number 340412-B21)
NOTE: Single-mode Fibre Channel cables are not provided with this kit. A list of
Fibre Channel cable suppliers can be found at the Compaq website:
www.compaq.com
■ Fibre Channel cable
 Multi-mode for distances from 2 meters to 500 meters
 2-meter multi-mode cable kit, part number 234457-B21
 5-meter multi-mode cable kit, part number 234457-B22
 15-meter multi-mode cable kit, part number 234457-B23
 Single-mode for distances of more than 500 meters and up to
10 kilometers
■ AC power cord (supplied)
■ Pencil (not supplied)
■ Cage nut installation tool (not supplied)
Installing the RAID Array 4100
To install the Compaq StorageWorks RAID Array 4100, you will need to:
1. Choose a location.
2. Install the RA4100 in the rack.
3. Install the hot-pluggable drive(s).
4. Install the Compaq StorageWorks Fibre Channel Storage Hub. Refer to
the documentation supplied with this device for details on installation
and rack mounting.