User guide

8 Compaq StorageWorks RAID Array 4100 User Guide
conditions 1-5
effect on performance E-7, E-8
procedure 4-24
SCSI 1-10, 2-1
securing 2-12, 4-25
spare F-3
supported 1-2, 1-7
troubleshooting 4-1
upgrading E-16
hardware
configurations 1-8
failure E-4, E-7, 1-8
mounting 2-1, 2-8
rack-mounting 2-1
help
additional sources xii
Compaq website xiii
Compq authorized resellers,
telephone numbers xiii
technical support telephone
numbers xii
help, Array Configuration
Utility 5-4
hot-pluggability
definition 1-5
http://www.compaq.com xiii
I
I/O
rates 1-7
standard 1-1
throughput D-2
icons
symbols on equipment xi
IDs, SCSI See SCSI, IDs
illustrations
begin capacity expansion by
adding more physical
drives E-14
bypass mode LEDs on the
Storage Hub 12 4-7
bypass mode LEDs on the
Storage Hub 7 4-5
data striping distributes data
across all physical
drives E-11
distributed data guarding
distributes redundant
data E-7
drive array with one logical
drive E-2
drive array with six physical
drives and two logical
drives E-3
drive array with two logical
drives E-2
drive failure LED 4-2
drive mirroring stores identical
copy of the data E-9
expanded array storage
capacity with a second
logical drive E-15
Fan Assembly LED 4-8
Fibre Channel Arbitrated Loop
configuration D-5
Fibre Channel data frame
structure D-7
Fibre Channel Host
Adapter/E 4-3
Fibre Channel Host
Adapter/P 4-2
front panel LEDs 3-2
GBIC Installed LEDs on the
Storage Hub 12 4-6
GBIC Installed LEDs on the
Storage Hub 7 4-5
hard drive LEDs 3-5
inserting the drive 2-12, 4-24
installing the Fan
Assembly 4-21
installing the power
supply 4-19
installing the RA4000
Controller 4-11, 4-13
latching the drive into
place 2-12, 4-24
Power and Fault LEDs on the
Storage Hub 12 4-6
power supply LED 4-9