Technical data

The default configuration is:
Array A: Consists of two logical drives and two physical drives
in slots 0 and 1.
Logical Drive 1:
Raid: 1
Size: 27555 MB
Sectors: 32
Stripe Size: 256
Array Accelerator: Enabled
Logical Drive 2:
Raid: 1
Size: 7171 MB
Sectors: 32
Stripe Size: 256
Array Accelerator: Enabled
If the Array and Logical Drive configuration has been altered
and the Quick Restore fails to work properly, use the Array
Configuration Utility to configure the drives as described above.
The Array Configuration Utility is available by booting the
system with the SmartStart CD included with the HP
StorageWorks NAS system.
WARNING: Do not replace the Operating System drives with
drives that were previously configured on another system. Replace
bad drives ONLY with blank, non-configured drives. If necessary,
install the drives in another system and use ACU to remove any
previous configuration from the drives.
24 HP StorageWorks NAS 4000s and 9000s Release Notes
HP CONFIDENTIAL
Writer: Ron Reisdorf File Name: 352398-001
Codename: AMX Part Number: 352398-001 Last Saved On: 10/27/03 4:39 PM