Technical data

Advanced Cluster Management button yields error on non-

configured clusters

On a system where clustering is not established, clicking on the

Advanced Cluster Management button will yield an error from

cluster administrator that Cluster service on node

xxxx cannot be started. The Service is

either not installed or not configured. This

message is displayed when attempting to setup the cluster for the

first time and is considered normal. Closing the message and

selecting File > New > Cluster will resolve the issue.

Rapid Startup will not alter the Administrative Password

The Rapid Startup Wizard will fail to alter the Administrative

password if the NAS device does not have an active network

connection. To resolve the issue establish a network connection

and restart the wizard.

Cluster Create Resource Wizard does not save state

When utilizing the Web UI to create cluster resources, some of

the wizard pages do not save the current data held in the fields if

the page is revisited by pressing the back button. Upon revisiting

the page the data will require reentry of the information.

HP CONFIDENTIAL

Writer: Ron Reisdorf File Name: 352398-001

Codename: AMX Part Number: 352398-001 Last Saved On: 10/27/03 4:39 PM