User`s guide

3-12 StorageWorks Fibre Channel Storage Switch Service Guide
SHR-1214A
1
2
5
3
4
Figure 3-7. Power Supply Side of Switch, Cover Removed
2. Remove the CPU card 2 as described in the section Replacing a CPU
Card.
3.
Remove the power supply connectors 3 from the motherboard.
4.
Remove the two screws from the bottom of the unit 4.
5.
Remove the power supply connector 5 from the motherboard.
6.
Unclip the ferrite holding the power supply wires to the side of the unit
and gently pull the wires free of the ferrite.
7.
Remove the nuts that secure the power supply to the chassis.
CAUTION: The CPU card contains static sensitive components. Use ESD
precautions when handling this card.
NOTE: Make note of the connector’s position on the motherboard before disconnecting.
8. Carefully lift the power supply from the chassis.