QuickSpecs
HP ProLiant DL360 G5 Performance Models
HP ProLiant DL360 G5 Performance ModelsHP ProLiant DL360 G5 Performance Models
HP ProLiant DL360 G5 Performance Models
Standard Memory
Standard MemoryStandard Memory
Standard Memory
2 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) (2 x 1 GB)
Upgrading Memory and Memory Interleaving
Upgrading Memory and Memory InterleavingUpgrading Memory and Memory Interleaving
Upgrading Memory and Memory Interleaving
When upgrading memory, DIMMs 1A and 3A must match. DIMMs 5B and 7B, DIMMs 2C and 4C, and DIMMs 6D and 8D must
match and must be installed as a pair. When DIMMs 1A and 2A are populated the system is automatically configured for 2:1
interleaving. When all 4 banks are populated the system is automatically configured for 4:1 interleaving. When four, six, or eight
DIMMs are populated with identical DIMMs the system is automatically configured for bank interleaving.
S
tandard Memory Plus Optional Memory
tandard Memory Plus Optional Memorytandard Memory Plus Optional Memory
tandard Memory Plus Optional Memory
Up to 14 GB memory is available with the standard memory of 2 GB and the optional installation PC2-5300 Fully Buffered DIMMs
(DDR2-667) memory kits.
Standard Memory Replaced with Optional Memory
Standard Memory Replaced with Optional MemoryStandard Memory Replaced with Optional Memory
Standard Memory Replaced with Optional Memory
Up to 32 GB of memory is available with the removal of the standard 1 GB of memory and the optional installation of PC2-5300
Fully Buffered DIMMs (DDR2-667) memory kits.
NOTE:
NOTE:NOTE:
NOTE:
Chart does not represent all possible configurations.
Memory
MemoryMemory
Memory
Slot
SlotSlot
Slot
1
11
1 2
22
2 3
33
3 4
44
4 5
55
5 6
66
6 7
77
7 8
88
8
Standard
StandardStandard
Standard
2 GB
2 GB2 GB
2 GB 1 GB
1 GB1 GB
1 GB 1 GB
1 GB1 GB
1 GB
Empty
EmptyEmpty
Empty Empty
EmptyEmpty
Empty Empty
EmptyEmpty
Empty Empty
EmptyEmpty
Empty Empty
EmptyEmpty
Empty Empty
EmptyEmpty
Empty
Optional
OptionalOptional
Optional
14 GB
14 GB14 GB
14 GB
1 GB
1 GB1 GB
1 GB 1 GB
1 GB1 GB
1 GB 2 GB
2 GB2 GB
2 GB 2 GB
2 GB2 GB
2 GB 2 GB
2 GB2 GB
2 GB 2 GB
2 GB2 GB
2 GB 2 GB
2 GB2 GB
2 GB 2 GB
2 GB2 GB
2 GB
Maximum
MaximumMaximum
Maximum
32 GB
32 GB32 GB
32 GB
4 GB
4 GB4 GB
4 GB 4 GB
4 GB4 GB
4 GB 4 GB
4 GB4 GB
4 GB 4 GB
4 GB4 GB
4 GB 4 GB
4 GB4 GB
4 GB 4 GB
4 GB4 GB
4 GB 4 GB
4 GB4 GB
4 GB 4 GB
4 GB4 GB
4 GB
NOTE:
NOTE:NOTE:
NOTE:
In the online spare configuration, the ROM automatically configures the last populated bank as the spare memory. If only
banks A and B are populated, bank B is the spare bank. If banks A, B, and C are populated, bank C is the spare bank, Online spare
memory is configured through RBSU.
NOTE:
NOTE:NOTE:
NOTE:
Mirrored Memory uses mirrored banks to provide a high level of memory redundancy. Customer chooses to implement or
not: User selectable via BIOS and default is off.
Following are memory options available from HP:
1 GB FBD PC2-5300 2 x 512 MB Kit
397409-B21
2 GB FBD PC2-5300 2 x 1 GB Kit
397411-B21
2 GB FBD PC2-5300 2 x 1 GB LP Kit
461826-B21
4 GB FBD PC2-5300 2 x 2 GB Kit
397413-B21
4 GB FBD PC2-5300 2 x 2 GB LP Kit
461828-B21
8 GB FBD PC2-5300 2 x 4 GB Kit
397415-B21
Online spare FBDIMM configuration requirements (in addition to general configuration requirements):
When only bank A is being used, it must be fully populated with dual-rank FBDIMMs.
If banks A and C are being used, they must be fully populated.
If installed, bank A and bank C must contain FBDIMMs with identical part numbers.
If installed, bank B and bank D must also contain FBDIMMs with identical part numbers.
In online spare mode, FBDIMMs must be populated as specified in the following table:
QuickSpecs
HP ProLiant DL360 Generation 5 (G5)
HP ProLiant DL360 Generation 5 (G5)HP ProLiant DL360 Generation 5 (G5)
HP ProLiant DL360 Generation 5 (G5)
Memory
DA - 12476 North America — Version 30 — November 14, 2007
Page 37