User guide

DescriptionItem
Quad port FC card, host port, port 14
Power supply 25
Power supply 16
NIC 2, on primary node connects to port 1 of switch 2810-24G7
NIC 1, on primary node only, connects to the customer-provided external network (array)8
Keyboard connector9
Mouse connector10
Video connector11
Serial connector to access CLI12
Rear USB connector13
USB connector, on primary node connects to USB/Ethernet adapter, then to port 1 of switch 2510-2414
iLO 2 NIC connector (service port)15
Rear Panel LEDs and Buttons
StatusDescriptionItem
Green = Activity exists.iLO 2 NIC activity LED1
Flashing green = Activity exists.
Off = No activity exists.
Green = Link exists.iLO 2 NIC link LED2
Off = No link exists.
Red, green, and amber on or flashing = Power on.FC port LEDs3–5
LED that is on/flashing represents the link speed (red
= 1 Gbps, green = 2 Gbps, amber = 4 Gbps) =
Online, I/O activity.
Red, green, and amber flashing alternately =
Firmware error.
Red, green, and amber off = Power off.
Green = Activity exists.10/100/1000 NIC 1 activity LED6
Flashing green = Activity exists.
Off = No activity exists.
Green = Link exists.10/100/1000 NIC 1 link LED7
Off = No link exists.
Green = Activity exists.10/100/1000 NIC 2 activity LED8
Flashing green = Activity exists.
VLS12000 Node Components, LEDs, and Buttons 145