QuickSpecs
Step 5 - Hard Disk Drives
Step 5 - Hard Disk DrivesStep 5 - Hard Disk Drives
Step 5 - Hard Disk Drives
Drives are orderable two ways - either with the purchase of an array, or as add-on drives for arrays already installed. There are
different product numbers for Upgrade drives than Initial-installation drives
HP StorageWorks FC
HP StorageWorks FCHP StorageWorks FC
HP StorageWorks FC
Drives - Factory
Drives - FactoryDrives - Factory
Drives - Factory
installation
installationinstallation
installation
NOTE:
NOTE: NOTE:
NOTE:
Four (4) disk drives, either size/type, are required per disk
enclosure per system. A minimum of eight (8) disk drives are
required per EVA4100/6100/8100.
Not for use in
Not for use inNot for use in
Not for use in
EMEA
EMEAEMEA
EMEA
EMEA Only
EMEA OnlyEMEA Only
EMEA Only
300 GB 10K rpm dual-port 2 Gb/s FC-AL 1-inch (2.54 cm) drive
364622-B23
*
364622-B22
*
HP StorageWorks EVA 450 GB 10K Fibre Channel Hard Disk Drive
AP729B
*
AP729A
*
HP StorageWorks EVA 600 GB 10K Fibre Channel Hard Disk Drive
AP730B
*
AP730A
*
146 GB 15K rpm dual-port 2/4 Gb/s FC-AL 1-inch (2.54 cm)
drive
364621-B23
*
364621-B22
*
300 GB 15K rpm dual-port 2/4 Gb/s FC-AL 1-inch (2.54 cm)
drive
AG425B
*
AG425A
*
450 GB 15K rpm dual-port 2/4 Gb/s FC-AL 1-inch (2.54 cm)
drive
AG804B
*
AG804A
*
600 GB 15K rpm dual-port 2/4 Gb/s FC-AL 1-inch (2.54 cm)
drive
AP751B
AP751A
HP StorageWorks
HP StorageWorksHP StorageWorks
HP StorageWorks
FATA Drives -
FATA Drives -FATA Drives -
FATA Drives -
Factory installation
Factory installationFactory installation
Factory installation
1TB FATA disk dual-port 2 Gb FC Hybrid disk drive factory
integrated
AG883B
*
AG883A
*
*0D1 will appear after this part number on your sales order
indicating factory integration
NOTE:
NOTE:NOTE:
NOTE:
There is a minimum order requirement, with the first
installation of FATA add-on drives on an EVA, a minimum of 8
FATA drives are required to create the new NearOnline disk group.
NOTE:
NOTE:NOTE:
NOTE:
XCS supports the 1TB FATA. It has virtual device mapping
(addressable capacity) limits of 120/120/300TB (EVA4000 &
EVA4100/EVA6000 & EVA6100/EV8000 & EVA8100 respectively)
. Calculation of virtual device capacity includes all created virtual
disks plus the mapped capacity of all snapshot, snapclone and
mirrorclones on the array. The potential to reach the limits vary with
the usage of the array. When installing a significant number of the
1TB FATA drives into an array contact your sales or service
representative to discuss your configuration requirements.
Step 6 - Cables
Step 6 - CablesStep 6 - Cables
Step 6 - Cables
FC cable - Copper SFP
FC cable - Copper SFPFC cable - Copper SFP
FC cable - Copper SFP
The following cables are used with the M5314 and M5314A drive enclosure but are
not necessary for new installations. These cables are for use inside the cab between
the controllers and drive enclosures if replacement cables are required.
Cable FC Copper SFP .6m
321624-B21
Cable FC Copper SFP 2m
324394-B21
4Gb Upgrade Cable Kit
4Gb Upgrade Cable Kit4Gb Upgrade Cable Kit
4Gb Upgrade Cable Kit
The following cable kit is for use in upgrading the cables between the switches and the
M5314B enclosures for older EVAs to the 4Gb EVA4000/6000/8000 and
EVA4100/6100/8100.
HP StorageWorks 4Gb Cable Kit
AG311A
FC Loop Switch Kits
FC Loop Switch KitsFC Loop Switch Kits
FC Loop Switch Kits
This option is mandatory when upgrading the EVA4x00 2C1D to
QuickSpecs
HP StorageWorks 6100/8100 Enterprise Virtual Arrays
HP StorageWorks 6100/8100 Enterprise Virtual ArraysHP StorageWorks 6100/8100 Enterprise Virtual Arrays
HP StorageWorks 6100/8100 Enterprise Virtual Arrays
Configuration Information and Configuration Rules
DA - 12745 Worldwide — Version 11 — September 14, 2009
Page 36