Technical data

3. While lifting up the power supply module latch (1), grasp the fan element and pull the defective
power supply assembly out of the chassis (2).
1
2
15557
Installin
gthecomponent
1. Lift up on the power supply module latch (1) and slide the assembly into the chassis until it is fully
seated (2).
1
2
15558
2. Connect the AC power cord to the power supply.
3. Engag
ethecordlock.
Verifying proper operation
After replacing the power supply, verify that:
• The power supply LED is solid green.
• No new error messages are displayed on the array controller LCD panel.
maintenance and service guide
87