Technical data

Message Type
Description Action
10 FIRMWARE FLASH
FAILED
Error
ROM flash failed. Download new firmware
from the HP website and
initiate the firmware update
again.
If the issue persists, contact
HP support.
11 CLONING REF
USED
SYSTEM HALTED
Error
A firmware mism
atch
was detected,
message
07 CLONE FIRM
WARE?
'<'=NO, '>'=
YES was
displayed, a
nd the user
selected < f
or “No”.
Firmware on the controllers
must be updated to be the
same.
12 ONLINE UPGRADE
FLASHING FIRMWARE
Informational An online firmware update
is starting.
13 ONLINE UPGRADE
FLASHING STARTED
Informational An online firmware update
is in progress.
14 ONLINE U
PGRADE
FLASHING D
ONE
Informatio
nal
An online fir
mware update
has comple
ted.
15 ONLINE UPGRADE
FLASHING FAILED
Error
An online firmware update
has failed.
Download new firmware
from the HP website and
initiate the firmware update
again.
If the issue persists, contact
HP support.
16 ONLINE UPGRADE
RESTARTING SYSTEM
Informational An online firmware update
is forcing an automatic
restart of the system.
17 ONLIN
E UPGRADE
COMPLE
TE
Informa
tional
An onlin
e firmware update
has comp
leted successfully.
18 ONLINE UPGRADE
INCOMPLETE
Error
An online firmware
update was successful,
but a subsequent step
failed. In dual-controller
configurations, this may
cause the other to not
update properly.
Restart the system.
In dual-controller
configurations, if the
07 CLONE FIRMWARE?
'<'=NO, '>'=YES
message is displayed,
select >.
19 ONLINE UPGRADE
REDUNDANCY HALTED
Informational
In dual-controller
configurations, each
controller restarts at least
once during an online
firmware update. During
these restarts, the system is
not redundant.
20 I
NITIALIZING
SCS
I SUBSYSTEM
Informational
The
SCSIsubsystemisbeing
initialized as part of the
power-on sequence.
21 SCANNING FOR
SCSI DEVICES
Informational The MSA is scanning for
any attached SCSI devices
as part of the power-on
sequence.
22 INITIALIZING
SCSI DEVICES
Informational
The MSA is initializing all
discovered SCSI devices
as part of the power on
sequence.
maintenance and service guide
37