Specifications

Operation and Management

68 MSA1000 Reference Guide

Figure 31: MSA1000 expansion SCSI connectors

5. Attach the SCSI cables to the expansion disk enclosures. Attach the power

cords to the power supplies at the rear of the enclosures. Power on each

external disk enclosure.

6. Power on the MSA1000 system using the power switch in front of the system.

Turn on the host server(s) and allow it to boot.

7. Use the ACU or the CLI to verify current configuration is maintained and new

volumes are identified. If the migrated volumes are not identified, shut down

the system and verify connections.

8. Run the operating-system-specific disk administration utility to add logical

drive volumes. Some systems may require rebooting to use the new volumes.

For detailed information on drive migrations, go to the storage page on the

following website:

www.hp.com/go/msa1000

Item Description

SCSI Port A (SCSI Bus 2)

SCSI Port B (SCSI Bus 3)