Specifications

Operation and Management

54 MSA1000 Reference Guide

Replacing a SCSI I/O Module

Note: The SCSI I/O Module with an integrated EMU is not hot-pluggable. Before

replacing the module all I/O from the servers must be stopped and the MSA1000 must

be powered off.

1. Disconnect the SCSI cables from the SCSI I/O module.

Figure 20: Revoving the SCSI I/O module

2. Press down the port wine-colored release latch 1.

3. Slide the SCSI I/O module 2 straight out.