Technical data

Programming Features
5.14 Alpha SDA Commands, Parameters, and Qualifiers
5.14.2.5 SHOW DEVICE
The SHOW DEVICE command has the following new qualifiers:
Qualifier Meaning
/CDT=address Identifies the device by the address of its Connector Descriptor Table
(CDT). This applies to cluster port devices only.
/PDT Displays the Memory Channel Port Descriptor Table. This qualifier is
ignored for devices other than memory channel.
/UCB=ucb-
address
This is a synonym for /ADDRESS=ucb-address.
5.14.2.6 SHOW GCT
The SHOW GCT command has the following new qualifier:
Qualifier Meaning
/CHILDREN When used with /ADDRESS=n or /HANDLE=n, the /CHILDREN
qualifier causes SDA to display all nodes in the configuration
tree that are children of the specified node.
5.14.2.7 SHOW LOCK
The SHOW LOCK command’s qualifier /STATUS has the following new keyword:
Keyword Meaning
DPC Indicates a delete pending cache lock
5.14.2.8 SHOW PFN_DATA
The SHOW PFN_DATA command has the following new qualifier:
Qualifier Meaning
/RAD [={n|ALL}] Displays data on the disposition of pages among the Resource
Affinity Domain on applicable systems
5.14.2.9 SHOW POOL
The SHOW POOL command has the following new qualifiers:
5–22 Programming Features