Technical data

Programming Features
5.14 Alpha SDA Commands, Parameters, and Qualifiers
The following shows the parameter for the SHOW RAD command:
Parameter Meaning
number Displays information on CPUs and memory for the specified RAD
The following shows the qualifier for the SHOW RAD command:
Qualifier Meaning
/ALL Displays settings of the RAD_SUPPORT parameter fields and the CPU
and memory assignments for all RADs
5.14.1.5 SHOW TQE
The SHOW TQE command displays the entries in the Timer Queue. The default
output is a summary display of all timer queue entries (TQEs) in chronological
order.
There are no parameters for this command. The following shows the qualifiers
for the SHOW TQE command:
Qualifier Meaning
/ADDRESS=n Outputs a detailed display of the TQE at the specified
address
/ALL Outputs a detailed display of all TQEs
/BACKLINK Outputs the display of TQEs, either detailed (/ALL) or brief
(default), in reverse order, starting at the entry furthest into
the future
/PID=n Limits the display of the TQEs that affect the process with
the specified internal PID
/ROUTINE=n Limits the display of the TQEs for which the specified
address is the fork PC
5.14.1.6 UNDEFINE
The UNDEFINE command causes SDA to remove the specified symbol from its
symbol table.
The following shows the parameter for the UNDEFINE command:
Parameter Meaning
symbol The name of the symbol to be deleted from SDA’s symbol
table. A symbol name is required.
There are no qualifiers for this command.
5.14.2 New Parameters and Qualifiers for Existing Commands
The following section lists and defines new parameters and qualifiers for existing
commands.
5–20 Programming Features