User`s guide

Figure 3–1: RA3000 Pedestal Cabled for Split-Bus Configuration
J11
J16
ZK-1467U-AI
6. Remove the SCSI bus cable from the J16 backplane connector and the
device #1 backplane connector.
7. Connect SCSI bus jumper cable 17-04166-03 between backplane
connectors J11 and J16 (see Figure 3–2). This forms a single SCSI bus
within the base pedestal.
Reconfiguring the RA3000 Pedestal for the Expansion Pedestal Option 3–3