User`s guide

ManualsBrandsCompaq ManualsComputer equipmentRAID Array 3000 Controller Shelf

2–5

Displaying the pk* Console Environment Variables on an

AlphaServer 4100 System ........................................... 2–15

2–6

Displaying Console Variables for a KZPBA-CB on an

AlphaServer 8x00 System ........................................... 2–16

2–7

Setting the SCSI Bus ID ............................................ 2–17

Figures

2–1

KZPBA-CB Termination Resistors ................................. 2–10

2–2

StorageWorks RAID Array 3000 Controller Shelf Front View 2–18

2–3

RAID Array 3000 Pedestal Rear View ............................ 2–19

2–4

TruCluster Conﬁguration with an RA3000 Controller Shelf

with Active/Passive Failover and a DWZZH-05 UltraSCSI

Hub ......................................................................

2–20

2–5

TruCluster Conﬁguration with an RA3000 Pedestal with

Active/Passive Failover and a DWZZH-05 UltraSCSI Hub ... 2–21

2–6

TruCluster Conﬁguration with an RA3000 Pedestal with

Active/Passive Failover and a DWZZH-03 UltraSCSI Hub ... 2–22

2–7

TruCluster Conﬁguration with an RA3000 Controller Shelf

with Active/Active or Active/Passive Failover and a

DWZZH-05 UltraSCSI Hub ......................................... 2–23

2–8

TruCluster Conﬁguration with an RA3000 Pedestal with

Active/Active or Active/Passive Failover and a DWZZH-05

UltraSCSI Hub ........................................................ 2–25

2–9

Externally Terminated TruCluster Conﬁguration with an

RA3000 Pedestal with Active/Passive Failover .................. 2–26

2–10

Externally Terminated TruCluster Conﬁguration with an

RA3000 Controller Shelf with Active/Passive Failover ........ 2–26

2–11

Externally Terminated TruCluster Conﬁguration with an

RA3000 Controller Shelf with Active/Active or Active/Passive

Failover ................................................................. 2–27

2–12

Externally Terminated TruCluster Conﬁguration with a

Mid-bus RA3000 Controller Shelf with Active/Active or

Active/Passive Failover .............................................. 2–28

3–1

RA3000 Pedestal Cabled for Split-Bus Conﬁguration .......... 3–3

3–2

RA3000 Pedestal Cabled for Single-Bus Conﬁguration ........ 3–4

3–3

RA3000 Pedestal SCSI ID Renumbering ......................... 3–5

Tables

2–1

Conﬁguring TruCluster Hardware for Use with the RA3000 . 2–4

2–2

Installing Cables for RA3000 Radial Conﬁguration with a

DWZZH UltraSCSI Hub .............................................

2–6

iv Contents