User`s guide

• Command Console V2.0 for RAID Array 3000 User’s Guide

(AA-RBF2A-TE)—A graphical user interface (GUI) for managing

StorageWorks RAID products from a console running on a Windows 95

or Windows NT PC.

• Getting Started RAID Array 3000 for Digital UNIX Installation Guide

Describes how to unpack and set up your RA3000 subsystem

components, how to prepare your host system for use with the RA3000,

how to install the SWCC and create your ﬁrst virtual disk, and how to

communicate over a TCP/IP connection.

• StorageWorks RAID Array 3000 Controller Shelf Hardware User’s Guide

(EK-SMCPQ-UG)—Provides an overview and physical description and

describes the major features and characteristics of the RA3000 rack

mount subsystem. It also provides installation and cabling procedures.

• RAID Array 3000 Storage Subsystem Hardware User’s Guide

(EK-SMCPO-UG)—Provides an overview and physical description of the

RA3000 pedestal subsystem and describes how to install the expansion

pedestal option and how to convert the UltraSCSI bus in the base

pedestal from a split-bus to a through-bus conﬁguration.

• RAID Array 3000 Storage Subsystem Second Controller Option

Installation Guide (EK-SM3KC-IG)—Includes the steps required to

install a second HSZ22 controller option in the pedestal or controller

shelf enclosures. This includes saving the existing conﬁguration using

the StorageWorks Command Console (SWCC), unpgrading the

ﬁrmware, and installing the cache memory SIMM modules to

accommodate the second controller.

• RAID Array 3000 Storage Subsystem Expansion Pedestal Option

Installation Guide (EK-SM3KA-IG)—Describes how to install the

expansion pedestal option and how to convert the UltraSCSI bus in the

base pedestal from a split-bus to a through-bus conﬁguration. The

information in this guide is basically a reprint of Chapter 4 from the

RAID Array 3000 Storage Subsystem Hardware User’s Guide.

• UltraSCSI Conﬁguration Guidelines (EK-ULTRA-CG)—Provides

UltraSCSI conﬁguration rules and describes UltraSCSI components.

• StorageWorks Solutions BA356-SB 16-Bit Shelf User’s Guide

(EK-BA356-UG)—Describes the major StorageWorks 16-bit components

(such as shelves, power units, StorageWorks building blocks (SBBS)

and SCSI buses, personality modules, and cables), status displays,

speciﬁcations, and replacement procedures.

• StorageWorks SBB Shelf I/O Modules User’s Guide

(EK-SBBIO-UG)—Describes the 8-bit and 16-bit shelf I/O modules that

can be used with the BA356-series 16-bit SBB storage shelves.

2–2 Using the StorageWorks RAID Array 3000 in a TruCluster Conﬁguration