User`s guide

2
Using the StorageWorks RAID Array
3000 in a TruCluster Configuration
This chapter describes how to install the hardware for a TruCluster
Production Server Software or TruCluster Available Server Software
configuration which includes the StorageWorks RAID Array 3000 (RA3000)
storage subsystem.
2.1 RA3000 Installation Overview
Review the restrictions in Section 1.2 before installing any TruCluster
Production Server Software or TruCluster Available Server Software
hardware.
See the following TruCluster Software Products manuals for assistance in
cluster configuration, installation, and administration:
• Hardware Configuration—Describes how to set up the systems that are
to become cluster members, and how to configure cluster shared storage.
• Software Installation—Describes how to install TruCluster Software
products.
• Administration—Describes administration tasks, such as those required
to set up an ASE. It also shows how to configure, start, and manage
distributed raw disk (DRD) services and other available services.
See the following TruCluster technical updates:
• Hardware Configuration Technical Update for DS-DWZZH-03
UltraSCSI Hub
• Hardware Configuration Technical Update for DS-DWZZH-05
UltraSCSI Hub
• Hardware Configuration Technical Update for KZPBA-CB
These technical updates may be obtained from the Web at the following
URL:
http://www.unix.digital.com/faqs/publications/pub_page/update_list.html
See the following StorageWorks manuals for more information on the
StorageWorks RAID Array 3000 or UltraSCSI configuration:
Using the StorageWorks RAID Array 3000 in a TruCluster Configuration 2–1