QuickSpecs

Interface DAT 40 DAT 72 DAT 160
SCSI Interface SCSI-3 Ultra 160 LVD SCSI-3 Ultra 160 LVD SCSI-3 Ultra 160 LVD
SCSI Connector Internal: 68-pin wide HD
LVD
External: 68-pin wide
HDLVD, thumbscrew
Hot-plug: 80-pin SCA-2
(SCSI and power)
Array module: 80-pin
EBBI
Internal: 68-pin wide HD
LVD
External: 68-pin wide
LVDS, thumbscrew
Hot-plug: 80-pin SCA-2
(SCSI and power)
Array module: 80-pin
EBBI
Internal: 68-pin wide HD
LVD
External: 68-pin wide
LVDS, thumbscrew
Array module: 80-pin
EBBI
USB Interface USB 2.0 USB 2.0 USB 2.0
USB Connector USB standard series B
receptacle
USB standard series B
receptacle
USB standard series B
receptacle
Termination - is only
required for the SCSI
product
No terminator is required for internal model (assumes use of terminated
cable).
External model requires termination with multimode terminator (included with
product).
SCSI Array module requires termination with multimode terminator (ordered
separately - p/n C2364A).
Power Specifications DAT 40 DAT 72 DAT 160
Power Requirements
(SCSI-2 internal, hot-plug,
and array module)
+5V ± 5% (100mV Max
ripple) @0.6A
+12V ± 10% (150mV
Max ripple) @1.2A
+5V ± 5% (100mV Max
ripple) @0.6A
+12V ± 10% (150mV
Max ripple) @1.2A
Power Requirements (USB
and SCSI-3 internal, and
array module)
+5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A
+5V ± 5% (100mV Max
ripple) @0.8A
+12V ± 10% (150mV
Max ripple) @0.3A
+5V ± 5% (100mV Max
ripple) @1.1A
+12V ± 10% (150mV
Max ripple) @0.4A
Power Requirements
(external)
100 to 240 VAC, 50-60
Hz, auto-ranging
100 to 240 VAC, 50-60
Hz, auto-ranging
100 to 240 VAC, 50-60
Hz, auto-ranging
Power consumption (SCSI)
(average)
7.3 Watts 7.1 Watts 10.3 Watts
Power consumption (USB)
(average)
7.3 Watts 7.1 Watts 10.3 Watts
Environmental
Specifications
(all models)
Relative Humidity Storage 5% to 95%
Operating 20% to 80%
Temperature Range Storage -40° to 158° F/(-40° to 70° C)
Operating 41° to 104° F/(5° to 40° C)
Standards Compliance cCSAus Certification to C22.2, No. 60950, TÜV EN60950 (IEC 60950), FCC and CE Declaration of
Conformity, C-TICK Approved (AS/NZS CISPR22), VCCI Approved, RRL Approved, BSMI Approved,
GOSH Approved
QuickSpecs
HP StorageWorks DAT Drives
Technical Specifications
DA - 11883 Worldwide QuickSpecs — Version 25 — 8.6.2007 Page 24