HP ProLiant SL390s G7 4U half width Server User Guide Part Number 632679-001 February 2011 (First Edition)
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft, Windows, and Windows Server are U.S.
Contents Component identification ............................................................................................................... 6 Front panel components ............................................................................................................................. 6 Front panel LEDs and buttons ...................................................................................................................... 7 Rear panel components .........................................
Configuration tools .................................................................................................................................. 35 SmartStart software ........................................................................................................................ 35 HP ROM-Based Setup Utility ............................................................................................................ 36 Array Configuration Utility ...............................................
FCC rating label ............................................................................................................................ 63 Class A equipment......................................................................................................................... 63 Class B equipment .........................................................................................................................
Component identification Front panel components NOTE: This figure illustrates the left and right system trays.
Item Description 17 iLO 3 network port 18 USB connectors *By default, the HP NC543i 2-port 4x QDR IB/10Gb Adapter is configured as a dual-port 10 GigE device. If the InfiniBand Enablement kit is installed, then the onboard QSFP port functions as InfiniBand, and the device operates as a 1-port 10 GigE (SFP+) and 1-port QDR InfiniBand (QSFP).
Item Description Status 9 NIC 1/iLO 3 activity LED Flashing green—Network data activity exists. Off—No network data activity exists, or no network connection exists. 10 NIC 1/iLO 3 speed LED Green—LAN connection using a GbE link Amber—LAN connection using a 10 Mbps/100 Mbps link Off—No LAN connection exists. 11 UID LED button Blue—Activated Flashing blue—System is being remotely managed. Off—Deactivated * A subnet manager is required to manage and control an InfiniBand fabric.
Rear panel LEDs and buttons Item Description Status 1 Fan 8 power LED Off—Normal Amber—Fan has failed. 2 Fan 7 power LED Off—Normal Amber—Fan has failed. 3 UID LED button Blue—Activated Flashing blue—System is being remotely managed. Off—Deactivated 4 Fan 4 power LED Off—Normal Amber—Fan has failed. 5 Fan 3 power LED Off—Normal Amber—Fan has failed. 6 Fan 1 power LED Off—Normal Amber—Fan has failed. 7 Fan 2 power LED Off—Normal Amber—Fan has failed.
Item Description Status 12 Fan 5 power LED Off—Normal Amber—Fan has failed. 13 Fan 6 power LED Off—Normal Amber—Fan has failed.
Item Designator Description 11 J32 SATA 1 Connector 12 J9 SATA 2 Connector 13 J18 SATA 3 Connector 14 J19 SATA 4 Connector 15 J56 QPI connector 16 J24 Riser connector 17 J10 CPU2 DIMM slot 6A 18 J11 CPU2 DIMM slot 5D 19 J13 CPU2 DIMM slot 4B 20 J14 CPU2 DIMM slot 3E 21 J16 CPU2 DIMM slot 2C 22 J17 CPU2 DIMM slot 1F 23 XU1 CPU 1 socket 24 U24 CPU1 VRD U5 U4 U30 U27 25 J36 Power connector 26 J42 RPS connector System board switches System maintenance switch Po
Diagnostic LEDs Position Position Function S7 S8 Diagnostic LEDs Off Off Port 85 Off On Port 84 On Off iLO 3 NMI functionality An NMI crash dump enables administrators to create crash dump files when a system is hung and not responding to traditional debug mechanisms. Crash dump log analysis is an essential part of diagnosing reliability problems, such as hangs in operating systems, device drivers, and applications.
DIMM slots DIMM slots are identified by the numbers 1 through 6. DIMM population order is specified by the letters A through F. Hard drive numbering The following figure illustrates the location of hard drives on the front of the system tray.
Battery pack LEDs Item ID Color Description 1 Green System Power LED. This LED glows steadily when the system is powered up and 12 V system power is available. This power supply is used to maintain the battery charge and provide supplementary power to the cache microcontroller. 2 Green Auxiliary Power LED. This LED glows steadily when 3.3V auxiliary voltage is detected.
LED3 pattern LED4 pattern Interpretation — One blink per second The battery pack is below the minimum charge level and is being charged. Features that require a battery (such as write cache, capacity expansion, stripe size migration, and RAID migration) are temporarily unavailable until charging is complete. The recharge process takes between 15 minutes and two hours, depending on the initial capacity of the battery.
GPU location Item Description 1 GPU 1 2 GPU 2 3 GPU 3 4 GPU 4 5 GPU 5 6 GPU 6 7 GPU 7 8 GPU 8 Removing the server from the chassis 1. Press the latch to release the handle. 2. Rotate the handle to disengage the power connector. 3. Extend the server from the chassis until the release latch catches. 4. While firmly holding the server, press the release button.
5. Remove the server from chassis. 6. Repeat the previous steps to remove the right server from the chassis.
Setup Optional installation services Delivered by experienced, certified engineers, HP Care Pack services help you keep your servers up and running with support packages tailored specifically for HP ProLiant systems. HP Care Packs let you integrate both hardware and software support into a single package. A number of service level options are available to meet your needs.
Optimum environment When installing the server in a rack, select a location that meets the environmental standards described in this section. Space and airflow requirements To allow for servicing and adequate airflow, observe the following space and airflow requirements when deciding where to install a rack: • Leave a minimum clearance of 63.5 cm (25 in) in front of the rack. • Leave a minimum clearance of 76.2 cm (30 in) behind the rack. • Leave a minimum clearance of 121.
Temperature requirements To ensure continued safe and reliable equipment operation, install or position the system in a wellventilated, climate-controlled environment. The maximum recommended ambient operating temperature (TMRA) for most server products is 35°C (95°F). The temperature in the room where the rack is located must not exceed 35°C (95°F).
Because of the high ground-leakage currents associated with multiple servers connected to the same power source, HP recommends the use of a PDU that is either permanently wired to the building’s branch circuit or includes a nondetachable cord that is wired to an industrial-style plug. NEMA locking-style plugs or those complying with IEC 60309 are considered suitable for this purpose. Using common power outlet strips for the server is not recommended.
Installing the server into the chassis 1. Insert the system tray into the chassis. 2. Rotate the tray handle to lock. 3. Connect peripheral devices to the server. NOTE: This figure illustrates the left and right system trays.
Item Description 6 NIC 1 network port /iLO 3 sideband port 7 NIC 2 network port 8 iLO 3 network port 9 USB connectors 10 Front PCIe bracket (LP slot) 11 VGA port 12 Serial port (RJ45 style) 13 SFP+/10 GigE port* 14 QSFP/InfiniBand port* 15 NIC 1 network port /iLO 3 sideband port 16 NIC 2 network port 17 iLO 3 network port 18 USB connectors *By default, the HP NC543i 2-port 4x QDR IB/10Gb Adapter is configured as a dual-port 10 GigE device.
• Manual installation—Insert the operating system CD into the CD-ROM drive and reboot the server. This process may require you to obtain additional drivers from the HP website (http://www.hp.com/support). For information on using these installation paths, refer to the SmartStart installation poster in the HP ProLiant Essentials Foundation Pack, included with the server. Powering up and configuring the server To power up the server, press the Power On/Standby button.
Registering the server To register the server, refer to the HP Registration website (http://register.hp.com).
Hardware options installation Introduction If more than one option is being installed, read the installation instructions for all the hardware options and identify similar steps to streamline the installation process. WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them. CAUTION: To prevent damage to electrical components, properly ground the server before beginning any installation procedure.
b. Lift the heat sink away from the system board. 4. Open the processor retaining latch and the processor socket retaining bracket. 5. Remove the processor socket protective cover. IMPORTANT: Be sure the processor remains inside the processor installation tool.
6. If the processor has separated from the installation tool, carefully re-insert the processor in the tool. 7. Align the processor installation tool with the socket and install the processor.
8. Press down firmly until the processor installation tool clicks and separates from the processor, and then remove the processor installation tool. 9. Close the processor socket retaining bracket and the processor retaining latch. 10. Reinstall the heat sink: a. Align the heat sink mounting pins to the system board mounting holes. b. Tighten the mounting pins to secure the heat sink to the system board. Memory configurations The server has 12 DIMM slots that support up to 96 GB maximum system memory.
• Of the two DIMMs in a given channel, DIMM 0 is the farthest from the processor. • Each DIMM can have a maximum capacity of 16 GB. • CPU speed is 800 MHz, 1067 MHz, or 1333 MHz depending on DIMM population. • DIMM voltage is 1.5V and LV 1.35V. • All valid DIMM configurations are supported, provided the total node power is rated below the maximum value.
4. Install the DIMM. 5. Install the server into the chassis. 6. Power up the server. Hard drive guidelines When adding hard drives to the server, observe the following general guidelines: • The system automatically sets all drive numbers. • If only one hard drive is used, install it in the bay with the lowest drive number. • Drives must be the same capacity to provide the greatest storage space efficiency when drives are grouped together into the same drive array.
5. Rotate the HDD carrier handle down. 6. Install the server into the chassis. 7. Power up the server. ("Powering up and configuring the server" on page 24) Expansion board options The server supports PCI, PCI-X, and PCI Express expansion boards. Installing a low-profile expansion board 1. Power down the server (on page 24). 2. Remove the server from the chassis. 3. Remove the expansion slot cover.
4. Install the low-profile expansion board. 5. Connect any required internal or external cables to the expansion board. See the documentation that ships with the expansion board. 6. Install the server into the chassis. PCI riser board option CAUTION: For proper cooling do not operate the server without the access panel, baffles, expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open. 1.
Cabling Battery cabling for BBWC Cabling 34
Configuration and utilities Configuration tools SmartStart software SmartStart is a collection of software that optimizes single-server setup, providing a simple and consistent way to deploy server configuration. SmartStart has been tested on many ProLiant server products, resulting in proven, reliable configurations.
then be deployed across multiple servers with similar hardware and software components. For more information, refer to the SmartStart Scripting Toolkit User Guide on the HP website (http://h18004.www1.hp.com/products/servers/management/toolkit/documentation.html).
NOTE: If the boot drive is not empty or has been written to in the past, ORCA does not automatically configure the array. You must run ORCA to configure the array settings. Drives installed Drives used RAID level 1 1 RAID 0 2 2 RAID 1 3, 4, 5, or 6 3, 4, 5, or 6 RAID 5 More than 6 0 None To change any ORCA default settings and override the auto-configuration process, press the F8 key when prompted. By default, the auto-configuration process configures the system for the English language.
• Remains available any time that the server is on • Displays on-screen tips for individual steps of a configuration procedure • Beginning with ACU version 8.28.13.0, provides diagnostic functionality on the Diagnostics tab (formerly known as Array Diagnostics Utility). For optimum performance, the minimum display settings are 1024 × 768 resolution and 16-bit color. Servers running Microsoft® operating systems require one of the following supported browsers: • Internet Explorer 6.
For more information about HP Insight Control, see the HP website (http://www.hp.com/go/insightcontrol). Re-entering the server serial number and product ID After you replace the system board, you must re-enter the server serial number and the product ID. 1. During the server startup sequence, press the F9 key to access RBSU. 2. Select the System Options menu. 3. Select Serial Number.
http://www.hp.com/support/ For example: http://www.hp.com/support/dl360g6 To access the server-specific page for this server, enter the following web address into the browser: http://www.hp.com/support/sl390sg7 (http://www.hp.com/support/sl390sg7) Integrated Lights-Out 3 technology The iLO 3 subsystem is a standard component of selected ProLiant servers that provides server health and remote server manageability.
HP Systems Insight Manager HP SIM is a web-based application that allows system administrators to accomplish normal administrative tasks from any remote location, using a web browser. HP SIM provides device management capabilities that consolidate and integrate management data from HP and third-party devices. IMPORTANT: You must install and use HP SIM to benefit from the Pre-Failure Warranty for processors, SAS and SATA hard drives, and memory modules.
• RBSU • Diagnostics • DOS • Operating environments which do not provide native USB support Internal USB functionality An internal USB connector is available for use with USB drive keys only. This solution provides for use of a permanent boot drive from a USB drive key installed in the internal connector, avoiding issues of clearance on the front of the rack and physical access to secure data. For additional security, you can disable the external USB connectors through RBSU.
NOTE: The current version of SmartStart provides the memory spare part numbers for the server. To download the latest version, see the HP website (http://www.hp.com/support). Integrated Management Log The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each event with 1-minute granularity.
Insight Manager. A dedicated server is recommended to host both HP Systems Insight Manager and HP Insight Remote Support Advanced. Details for both versions are available on the HP website (http://www.hp.com/go/insightremotesupport). To download the software, go to Software Depot (http://www.software.hp.com). Select Insight Remote Support from the menu on the right.
IMPORTANT: This utility supports operating systems that may not be supported by the server. For operating systems supported by the server, see the HP website (http://www.hp.com/support). • Integrates with other software maintenance, deployment, and operating system tools • Automatically checks for hardware, firmware, and operating system dependencies, and installs only the correct ROM upgrades required by each target server To download the tool and for more information, see the HP website (http://www.
Troubleshooting Troubleshooting resources The HP ProLiant Servers Troubleshooting Guide provides procedures for resolving common problems and comprehensive courses of action for fault isolation and identification, error message interpretation, issue resolution, and software maintenance on ProLiant servers and server blades. This guide includes problemspecific flowcharts to help you navigate complex troubleshooting processes. To view the guide, select a language: • English (http://www.hp.
Symbols on equipment The following symbols may be placed on equipment to indicate the presence of potentially hazardous conditions. This symbol indicates the presence of hazardous energy circuits or electric shock hazards. Refer all servicing to qualified personnel. WARNING: To reduce the risk of injury from electric shock hazards, do not open this enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel. This symbol indicates the presence of electric shock hazards.
WARNING: To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding plug. The grounding plug is an important safety feature. • Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. • Unplug the power cord from the power supply to disconnect power to the equipment. • Do not route the power cord where it can be walked on or pinched by items placed against it.
Prepare the server for diagnosis 1. Be sure the server is in the proper operating environment with adequate power, air conditioning, and humidity control. For required environmental conditions, see the server documentation. 2. Record any error messages displayed by the system. 3. Remove all diskettes, CD-ROMs, DVD-ROMs, and USB drive keys. 4. Power down the server and peripheral devices if you will be diagnosing the server offline. If possible, always perform an orderly shutdown: a.
Service notifications To view the latest service notifications, refer to the HP website (http://www.hp.com/go/bizsupport). Select the appropriate server model, and then click the Troubleshoot a Problem link on the product page. Troubleshooting flowcharts To effectively troubleshoot a problem, HP recommends that you start with the first flowchart in this section, "Start diagnosis flowchart (on page 50)," and follow the appropriate diagnostic path.
General diagnosis flowchart The General diagnosis flowchart provides a generic approach to troubleshooting. If you are unsure of the problem, or if the other flowcharts do not fix the problem, use the following flowchart. Item Refer to 1 "Symptom information (on page 48)" 2 "Loose connections (on page 49)" 3 "Service notifications (on page 50)" 4 The most recent version of a particular server or option firmware is available on the HP Support website (http://www.hp.com/support).
Item Refer to 5 "General memory problems are occurring" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website (http://www.hp.com/support) 6 Server maintenance and service guide, located on the Documentation CD or the HP website (http://www.hp.com/products/servers/platforms) 7 • Server maintenance and service guide, located on the Documentation CD or the HP website (http://www.hp.
Server power-on problems flowchart Symptoms: • The server does not power on. • The system power LED is off or amber.
• The external health LED is red or amber. • The internal health LED is red or amber. NOTE: For the location of server LEDs and information on their statuses, refer to the server documentation.
Troubleshooting 55
POST problems flowchart Symptoms: • Server does not complete POST NOTE: The server has completed POST when the system attempts to access the boot device.
OS boot problems flowchart Symptoms: • Server does not boot a previously installed operating system • Server does not boot SmartStart Possible causes: • Corrupted operating system • Hard drive subsystem problem • Incorrect boot order setting in RBSU Troubleshooting 57
Item Refer to 1 HP ROM-Based Setup Utility User Guide (http://www.hp.com/servers/smartstart) 2 "POST problems flowchart (on page 56)" 3 • "Hard drive problems" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website (http://www.hp.com/support) • Controller documentation 4 "HP Insight Diagnostics (on page 42)" or in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website (http://www.hp.
Server fault indications flowchart Symptoms: • Server boots, but a fault event is reported by Insight Management Agents (on page 41) • Server boots, but the internal health LED, external health LED, or component health LED is red or amber Troubleshooting 59
NOTE: For the location of server LEDs and information on their statuses, refer to the server documentation. Possible causes: • Improperly seated or faulty internal or external component • Unsupported component installed • Redundancy failure • System overtemperature condition Item Refer to 1 "Management agents (on page 41)" or in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website (http://www.hp.
POST error messages and beep codes For a complete listing of error messages, refer to the "POST error messages" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD or on the HP website (http://www.hp.com/support). WARNING: To avoid potential problems, ALWAYS read the warnings and cautionary information in the server documentation before removing, replacing, reseating, or modifying system components.
System battery If the server no longer automatically displays the correct date and time, you may need to replace the battery that provides power to the real-time clock. WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not properly handled. To reduce the risk of personal injury: • Do not attempt to recharge the battery.
Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this regulatory model number.
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
Canadian notice (Avis Canadien) Class A equipment This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Class B equipment This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Disposal of waste equipment by users in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Korean notice Class A equipment Class B equipment Chinese notice Class A equipment Vietnam compliance marking notice This marking is for applicable products only. Laser compliance This product may be provided with an optical storage device (that is, CD or DVD drive) and/or fiber optic transceiver. Each of these devices contains a laser that is classified as a Class 1 Laser Product in accordance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser radiation.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States. Battery replacement notice WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or an alkaline battery pack.
Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To prevent electrostatic damage: • Avoid hand contact by transporting and storing products in static-safe containers.
Specifications Environmental specifications Specification Value Temperature range* Operating 10°C to 35°C (50°F to 95°F) Shipping -30°C to 50°C (-22°F to 122°F) Storage -30°C to 60°C (-22°F to 140°F) Maximum wet bulb temperature 28°C (82.4°F) Relative humidity (noncondensing)** Operating 10% to 90% Non-operating 5% to 95% * All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed.
Rated steady-state power 750 W at 100 VAC input 1200 W at 200–240 VAC input System input requirements information is based on measurements with hardware available at the time of publishing this document. For updated information, see the HP website (http://www.hp.com/servers/powercalculator).
Technical support Before you contact HP Be sure to have the following information available before you call HP: • Technical support registration number (if applicable) • Product serial number • Product model name and number • Product identification number • Applicable error messages • Add-on boards or hardware • Third-party hardware or software • Operating system type and revision level HP contact information For the name of the nearest HP authorized reseller: • See the Contact HP worldwi
• Optional—Parts for which customer self repair is optional. These parts are also designed for customer self repair. If, however, you require that HP replace them for you, there may or may not be additional charges, depending on the type of warranty service designated for your product. NOTE: Some HP parts are not designed for customer self repair. In order to satisfy the customer warranty, HP requires that an authorized service provider replace the part.
Pour plus d'informations sur le programme CSR de HP, contactez votre Mainteneur Agrée local. Pour plus d'informations sur ce programme en Amérique du Nord, consultez le site Web HP (http://www.hp.com/go/selfrepair). Riparazione da parte del cliente Per abbreviare i tempi di riparazione e garantire una maggiore flessibilità nella sostituzione di parti difettose, i prodotti HP sono realizzati con numerosi componenti che possono essere riparati direttamente dal cliente (CSR, Customer Self Repair).
HINWEIS: Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des Kunden zu erfüllen, muss das Teil von einem HP Servicepartner ersetzt werden. Im illustrierten Teilekatalog sind diese Teile mit „No“ bzw. „Nein“ gekennzeichnet. CSR-Teile werden abhängig von der Verfügbarkeit und vom Lieferziel am folgenden Geschäftstag geliefert. Für bestimmte Standorte ist eine Lieferung am selben Tag oder innerhalb von vier Stunden gegen einen Aufpreis verfügbar.
el caso de todas sustituciones que lleve a cabo el cliente, HP se hará cargo de todos los gastos de envío y devolución de componentes y escogerá la empresa de transporte que se utilice para dicho servicio. Para obtener más información acerca del programa de Reparaciones del propio cliente de HP, póngase en contacto con su proveedor de servicios local. Si está interesado en el programa para Norteamérica, visite la página web de HP siguiente (http://www.hp.com/go/selfrepair).
Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas para o reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a cobrança de taxa adicional, dependendo do tipo de serviço de garantia destinado ao produto. OBSERVAÇÃO: Algumas peças da HP não são projetadas para o reparo feito pelo cliente. A fim de cumprir a garantia do cliente, a HP exige que um técnico autorizado substitua a peça.
Technical support 78
Technical support 79
Acronyms and abbreviations ABEND abnormal end AC alternating current AMP Advanced Memory Protection ASR Automatic Server Recovery BBWC battery-backed write cache CPU central processing unit CSA Canadian Standards Association CSR Customer Self Repair DDR double data rate DIMM dual inline memory module DOS disk operating system ECC error checking and correcting Acronyms and abbreviations 80
GPU graphics processing unit HDD hard drive HTTP hypertext transfer protocol ICH I/O controller hub iLO Integrated Lights-Out IML Integrated Management Log KVM keyboard, video, and mouse LED light-emitting diode LFF large form-factor NFPA National Fire Protection Association NMI non-maskable interrupt NVRAM non-volatile memory ORCA Option ROM Configuration for Arrays OS operating system Acronyms and abbreviations 81
PCI peripheral component interface PCIe peripheral component interconnect express PCI-X peripheral component interconnect extended POST Power-On Self Test PPM processor power module PSP ProLiant Support Pack PXE Preboot Execution Environment QPI QuickPath Interconnect QSFP quad small form-factor pluggable RBSU ROM-Based Setup Utility RDIMM Registered Dual In-line Memory Module RDP Rapid Deployment Pack SAS serial attached SCSI SATA serial ATA Acronyms and abbreviations 82
SDRAM synchronous dynamic RAM SFF small form-factor SFP small form-factor pluggable SFP+ small form-factor pluggable - plus SIM Systems Insight Manager SMTP Simple Mail Transfer Protocol SNMP Simple Network Management Protocol SSD solid-state drive TMRA recommended ambient operating temperature TPM trusted platform module UID unit identification UPS uninterruptible power system USB universal serial bus VCA Version Control Agent Acronyms and abbreviations 83
VRD Voltage Regulator Down Acronyms and abbreviations 84
Index A D ACU (Array Configuration Utility) 37 additional information 46 ADU (Array Diagnostic Utility) 43 airflow requirements 19, 20 Array Configuration Utility (ACU) 37 Array Diagnostic Utility (ADU) 43 ASR (Automatic Server Recovery) 39 authorized reseller 72 auto-configuration process 36 Automatic Server Recovery (ASR) 39 Declaration of Conformity 64 diagnosing problems 46 diagnostic tools 39, 42 diagnostics utility 42 DIMMs 13, 29, 30 drivers 44 B batteries, replacing 68 battery 12, 34, 62, 68 bat
HP ProLiant Essentials Foundation Pack 41 HP ProLiant Essentials Rapid Deployment Pack 38 HP Systems Insight Manager overview 41 I identification number 63 iLO (Integrated Lights-Out) 40 IML (Integrated Management Log) 43 Important Safety Information document 46 Insight Diagnostics 42, 44 installation services 18 installation, server options 21, 26 installing hardware 26, 30, 31, 32, 33 installing operating system 23 Integrated Lights-Out (iLO) 40 Integrated Management Log (IML) 43 J Japanese notice 66 K
ROM-Based Setup Utility (RBSU) 36 ROMPaq utility 39, 41 utilities 35, 44 utilities, deployment 35, 36 S V safety considerations 21, 46 safety information 41 scripted installation 35 serial number 39 series number 63 server fault indications flowchart 59 server features and options 26 server, installation 22 service notifications 50 shipping carton contents 21 SmartStart autorun menu 35 SmartStart Scripting Toolkit 35 SmartStart, overview 35 software 35 space requirements 19 specifications 70 start diagn
