QuickSpecs

ManualsBrandsCompaq ManualsComputer equipmentProLiant SL390s - G7 Server

NOTE:

NOTE:NOTE:

NOTE:

Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use

of an HP approved configurator. Contact your local sales representative for additional information.

HP Unique Options

HP Unique OptionsHP Unique Options

HP Unique Options

HP IB Enablement Kit

NOTE:

NOTE:NOTE:

NOTE:

Needed to enable InfiniBand using QSFP port on system board.

614841-B21

HP SL390s 2U SAS Enablement Kit

NOTE:

NOTE:NOTE:

NOTE:

needed if use SAS drives instead of SATA drives.

620000-B21

HP SL390s 4U SAS Enablement Kit

NOTE:

NOTE:NOTE:

NOTE:

needed if use SAS drives instead of SATA drives.

641764-B21

HP SL390s NHP SATA Cable Kit

NOTE:

NOTE:NOTE:

NOTE:

This is needed when using internal non hot plug drive in 2U tray.

621024-B21

HP SL390s SFF Enablement Kit

NOTE:

NOTE:NOTE:

NOTE:

required for every 2 SFF drives being added to the 1U tray.

625034-B21

HP 2x170 P212 SAS 2 Hard Drive Power Cable Kit

NOTE:

NOTE:NOTE:

NOTE:

this is required when add two 3.5" SAS drive to the 1U tray.

589234-B21

HP z6000 P212 SAS 4 Hard Drive Power Cable Kit

NOTE:

NOTE:NOTE:

NOTE:

this is required when add four 3.5" SAS drive to the 1U tray.

574001-B21

HP SL390 2 GPU Riser Kit

NOTE:

NOTE:NOTE:

NOTE:

riser need when adding 2 GPUs to 2U tray.

614839-B21

HP SL390 Single GPU Riser Kit

NOTE:

NOTE:NOTE:

NOTE:

needed when adding 1 GPU to 2U tray.

NOTE:

NOTE:NOTE:

NOTE:

also needed if adding 3rdd GPU to 2U tray.

614840-B21

HP s6500 Redundant Fan Kit

NOTE:

NOTE:NOTE:

NOTE:

It is required that the entire chassis be filled with fans - Part number only

contains 1 fan, 8 must be purchased.

617856-B21

HP s6500 Non-Redundant Fan Kit

NOTE:

NOTE:NOTE:

NOTE:

It is required that the entire chassis be filled with fans - Part number only

contains 1 fan, 8 must be purchased.

617858-B21

HP s6500 Chassis Handles Kit

608477-B21

HP s6500 node blank Kit

NOTE:

NOTE:NOTE:

NOTE:

Node blank is needed when removing ½ width tray for service.

NOTE:

NOTE:NOTE:

NOTE:

Node blank is needed when not completely filling s6500 chassis.

NOTE:

NOTE:NOTE:

NOTE:

1 node blank is needed for every 1U half width space left in chassis.

622372-B21

HP s6500 4U 3rd Party Rail KIT

601946-B21

HP s6500 4U Rail KIT

599109-B21

QuickSpecs

HP ProLiant SL390s Generation 7 (G7)

HP ProLiant SL390s Generation 7 (G7)HP ProLiant SL390s Generation 7 (G7)

HP ProLiant SL390s Generation 7 (G7)

Core Options

DA - 13713 Worldwide — Version 8 — February 14, 2011

Page 27