Specifications

Removal and replacement procedures 42
To install a memory module:
1. Align the notch on the bottom edge of the module with the keyed surface of the DIMM slot and
then press the module fully into the slot.
2. Firmly press the holding clips inward to secure the memory module in place.
Figure 21 Installing a memory module
CAUTION: The memory slots are structured to ensure proper installation. If you insert a memory
module but it does not fit easily into the slot, you may have inserted it incorrectly. Double-check the
orientation of the module and reinsert. If the holding clips do not close, the module is not inserted
correctly.
NOTE: The ProLiant SL2x170z G6 server supports up to 64 memory modules. Install them in the
DIMM slots starting from the DIMM 1 slot.
PCI expansion cards
System board PCI expansion slots
There is one PCIe Gen2 x16 riser card slot on the system board.