User guide

System BIOS configuration 35
Exit menu
The Exit menu displays several options on how to quit the Setup Utility. Select any of the exit options
then press
Enter.
Figure 30 Exit menu
Table 22
Exit menu fields
Option Description
Save Changes and Exit Save the changes made and exit the Setup Utility.
Discard Changes and
Exit
Discard the changes and exit the setup utility.
Discard Changes Discard the changes in the utility.
Load Optimal Defaults Loads the default settings for all BIOS setup fields.
Loading system defaults
If the system fails after you make changes in the Setup menus, reboot the server, enter Setup, and
load the system default settings to correct the error. These default settings have been selected to
optimize the server’s performance. Setup default settings are quite demanding in terms of resource
consumption. If you are using low-speed memory chips or other types of low-performance components
and you choose to load these settings, the system might not function properly.
To load the system defaults:
1. Reboot the server in a normal manner.
2. During POST, press F10 to access the Setup Utility.
3. Press F9 to load the default values.
4. Press F10 to save the changes and close the Setup Utility.