QuickSpecs

ManualsBrandsCompaq ManualsComputer equipmentProLiant SL170s - G6 Server

NOTE:

NOTE:NOTE:

NOTE:

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are

ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on

configurable product offerings and requirements.

NOTE:

NOTE:NOTE:

NOTE:

Configure-to-order (CTO) servers must start with a CTO Chassis.

NOTE:

NOTE:NOTE:

NOTE:

FIO indicates that this option is only available as a factory installable option.

NOTE:

NOTE:NOTE:

NOTE:

If you already have an s6500 chassis skip to Step 1A.

Step 1: Base Configuration (choose one from each list unless otherwise noted)

Step 1: Base Configuration (choose one from each list unless otherwise noted)Step 1: Base Configuration (choose one from each list unless otherwise noted)

Step 1: Base Configuration (choose one from each list unless otherwise noted)

HP Chassis

HP ChassisHP Chassis

HP Chassis

NOTE:

NOTE:NOTE:

NOTE:

If you already have an s6500 chassis skip to Step 1A below.

HP ProLiant s6500 w/o Fans 4U Configure-to-order Chassis

NOTE:

NOTE:NOTE:

NOTE:

You must choose Power Supplies and fans as the chassis does not include

them.

NOTE:

NOTE:NOTE:

NOTE:

The Chassis dimensions are 6.96 x 17.638 x 35.236in (17.68 x 44.8 x

89.55cm) (HxWxD) and requires a 1200mm deep server rack.

614167-B21

HP Chassis Fans

HP Chassis FansHP Chassis Fans

HP Chassis Fans

HP s6500 Redundant Fan Kit

NOTE:

NOTE:NOTE:

NOTE:

This kit includes only 1 fan

NOTE:

NOTE:NOTE:

NOTE:

This selection must be ordered in quantities of 8.

NOTE:

NOTE:NOTE:

NOTE:

The Redundant Fan Kit also extends the depth of the SL Chassis to 38.15 in or

96.90 cm

617856-B21

HP s6500 Non-Redundant Fan Kit

NOTE:

NOTE:NOTE:

NOTE:

This kit includes only 1 fan

NOTE:

NOTE:NOTE:

NOTE:

This selection must be ordered in quantities of 8.

617858-B21

HP Rail Kits

HP Rail KitsHP Rail Kits

HP Rail Kits

HP s6500 4U 3rd Party Rail KIT

601946-B21

HP s6500 4U Rail KIT

599109-B21

HP s6500 POD Rail KIT

599108-B21

HP Power Supplies

HP Power SuppliesHP Power Supplies

HP Power Supplies

NOTE:

NOTE:NOTE:

NOTE:

Prior to making a power supply selection it is highly recommended that the HP

Power Advisor is run to determine the right size power supply for your server

configuration. The HP Power Advisor is located at:

www.hp.com/go/hppoweradvisor

HP 750W Common Slot Gold Hot Plug Power Supply Kit

512327-B21

HP 750W Common Slot Platinum Hot Plug Power Supply Kit

593831-B21

HP 1200W Common Slot Silver Hot Plug Power Supply Kit

500172-B21

HP 1200W Common Slot Platinum Hot Plug Power Supply Kit

578322-B21

NOTE:

NOTE:NOTE:

NOTE:

Option Kits contain optional power supply, an IEC power cable and PDU IEC

cables.

Step 1A: Select Nodes

Step 1A: Select NodesStep 1A: Select Nodes

Step 1A: Select Nodes

NOTE:

NOTE:NOTE:

NOTE:

Mixing and matching of half width trays is supported in the s6500 chassis.

NOTE:

NOTE:NOTE:

NOTE:

If you do not fill up chassis with servers, the HPs6500 node blank Kit 622372-B21 needs to be ordered for each

unpopulated half width 1U space.

HP Server Nodes

HP Server NodesHP Server Nodes

HP Server Nodes

HP ProLiant SL170s Right Tray Node Server

622224-B21

HP ProLiant SL170s G6 Left Tray Node Server

622226-B21

Step 2: Choose Required Node Options (only one of the following from each list unless

Step 2: Choose Required Node Options (only one of the following from each list unlessStep 2: Choose Required Node Options (only one of the following from each list unless

Step 2: Choose Required Node Options (only one of the following from each list unless

otherwise noted)

otherwise noted)otherwise noted)

otherwise noted)

QuickSpecs

HP ProLiant SL170s Generation 6 (G6)

HP ProLiant SL170s Generation 6 (G6)HP ProLiant SL170s Generation 6 (G6)

HP ProLiant SL170s Generation 6 (G6)

Configuration Information - Factory Integrated Models

DA - 13789 North America — Version 7 — May 9, 2011

Page 16