Specifications

Diagnostics and Troubleshooting 3-37
Table 3-2
POST Error Messages
continued
Error Code Audible Beeps Probable Source of
Problem
Action
1796-Drive Array –
Array Accelerator
Not Responding.
Array Accelerator is
temporarily
disabled.
None Array accelerator is
defective or has been
removed.
1. Check that the array accelerator is
properly seated.
2. Run the server setup utility to
reconfigure the Compaq IDA-2
without the array accelerator.
1797-Drive Array –
Array Accelerator
Read Error
Occurred.
Data in Array
Accelerator has
been lost.
Array Accelerator is
disabled.
None Hard parity error
detected while
reading data from
posted-writes
memory.
Enable array accelerator.
1798-Drive Array –
Array Accelerator
Write Error
Occurred.
Array Accelerator is
disabled.
None Hard parity error
detected while writing
data to posted-writes
memory.
Enable array accelerator.
1799-Drive Array –
Drive(s) Disabled
due to Array
Accelerator Data
Loss.
Select “F1” to
continue with
logical drives
disabled.
Select “F2” to
accept data loss
and to re-enable
logical drives.
None Volume failed due to
loss of data in
posted-writes
memory.
Press F1 to continue with logical drives
disabled or F2 to accept data loss and
re-enable logical drives.
continued