Specifications

Diagnostics and Troubleshooting 3-35
Table 3-2
POST Error Messages
continued
Error Code Audible Beeps Probable Source of
Problem
Action
1789-Slot X Drive
Array SCSI Drive(s)
Not Responding.
Check cables or
replace the
following SCSI
drives: SCSI Port Y:
SCSI ID Z
Select F1 to
continue – drive
array will remain
disabled.
Select F2 to failed
drives that are not
responding –
Interim Recovery
Mode will be
enabled if
configured for fault
tolerance.
None Cable or hard drive
failure occurred.
1. Check the cable connections.
2. If cables are connected, replace the
drive.
3. If you do not want to replace the
drives now, press F2
.
1790-Disk 0
Configuration Error
None Hard drive error or
wrong drive type
detected.
Run the server setup utility and
Diagnostics and correct. Replace failed
assembly as indicated.
1791-Disk 1 Error None Hard drive error or
wrong drive type
detected.
Run the server setup utility and
Diagnostics and correct. Replace failed
assembly as indicated.
1792-Drive Array
Reports Valid Data
Found in Array
Accelerator.
Data will
automatically be
written to drive
array.
None Indicates that while
the system was in
use, power was
interrupted while data
was in the array
accelerator memory.
Power was then
restored within 8 to
10 days, and the data
in the array
accelerator was
flushed to the drive
array.
No action necessary; no data has been
lost. Perform orderly system shutdowns
to avoid data remaining in the array
accelerator.
continued