Specifications

Diagnostics and Troubleshooting 3-33
Table 3-2
POST Error Messages
continued
Error Code Audible Beeps Probable Source of
Problem
Action
1786-Slot 1 Drive
Array Recovery
Needed. The
following SCSI
drive(s) need
Automatic Data
Recovery: SCSI
Port 1: SCSI ID 0
Select F1 to
continue with
recovery of data to
drive. Select F2 to
continue without
recovery of data to
drive.
-Or-
Slot 1 Drive Array
Recovery Needed.
Automatic Data
Recovery
Previously Aborted!
The following SCSI
drive(s) need
Automatic Data
Recovery: SCSI
Port 1: SCSI ID 0
Select F1 to retry
Automatic Data
Recovery to drive.
Select F2 to
continue without
starting Automatic
Data Recovery data
to drive data to
drive.
None System in Interim
Data Recovery mode.
Data has not yet been
recovered.
Press F1 to allow Automatic Data
Recovery to begin. Data is automatically
restored to drive X once the drive has
been replaced or seems to be working.
-Or-
1. Press F2 for the system to continue
to operate in the Interim Data
Recovery mode.
The “previously aborted” version of
the 1786 POST message displays if
the previous rebuild attempt was
aborted for any reason.
2. Run Array Diagnostic Utility (ADU)
for more information.
If the replacement drive was failed,
try using another replacement
drive.
-Or-
If rebuild was aborted due to a read
error from another physical drive in
the array, back up all readable data
on the array, run Diagnostics
Surface Analysis, and then restore
your data.
continued