Specifications

3-24 Compaq ProLiant ML350 Maintenance and Service Guide
Table 3-2
POST Error Messages
continued
Error Code Audible Beeps Probable Source of
Problem
Action
1729-Slot 1 Drive
Array – Disk
Consistency
Initialization in
Progress –
RAID 4/5
performance may
be lower until Auto
Reliability
Monitoring has
completed
Automatic
Background Parity
Consistency
Initialization.
None Initial RAID
configuration in
progress.
This message is normal following the
initial configuration of RAID 4 or RAID 5
logical drives. Performance of the
controller improves after the parity data
has been initialized by ARM (an
automatic process that runs in the
background on the controller).
1730-Fixed Disk 0
does not support
DMA Mode.
None Hard drive error
detected.
Run the server setup utility and correct.
1731-Fixed Disk 1
does not support
DMA Mode.
None Hard drive error
detected.
Run the server setup utility and correct.
1740-Fixed Disk 0
failed Set Block
Mode command
None Hard drive error
detected.
Run the server setup utility and correct.
1741-Fixed Disk 1
failed Set Block
Mode command
None Hard drive error
detected.
Run the server setup utility and correct.
1750-Fixed Disk 0
failed Identify
command
None Hard drive error
detected.
Run the server setup utility and correct.
1751-Fixed Disk 1
failed Identify
command
None Hard drive error
detected.
Run the server setup utility and correct.
continued