Specifications

Diagnostics and Troubleshooting 3-21
Table 3-2
POST Error Messages
continued
Error Code Audible Beeps Probable Source of
Problem
Action
1620-Locked SCSI
Bus Detected.
Verify SCSI bus
cabling. System
halted.
None SCSI bus failure
detected.
Ensure that the integrated SCSI controller
has SCSI termination attached.
1621-Current SCSI
bus cable
configuration is not
recommended
None Improper SCSI bus
cabling detected.
Check documentation for proper SCSI
bus cabling.
1622-Internal SCSI
Jumper Board Not
Installed.
None System has detected
that the array enabler
board is not installed.
Install the array enabler board.
1701-SCSI
Controller Failure
None Embedded SCSI
controller has failed
or an attached
device is preventing
normal operation.
1. Check SCSI cables and verify they
are fully seated.
2. Verify SCSI IDs are assigned
correctly at each SCSI device.
3. Remove SCSI cables from the
controller and observe if the failure
still occurs. If necessary, replace
the cables.
4. Run Diagnostics.
5. Remove individual SCSI devices
from the cable to identify a
suspect device.
6. Replace failed assembly.
1702-SCSI Cable
Error Detected
None SCSI cable has
failed.
1. Reseat the SCSI cable on the
controller and all attached devices.
2. Check the SCSI cable at all
connectors for bent pins.
3. Replace SCSI cable.
continued