Specifications

Diagnostics and Troubleshooting 3-3
Table 3-1
Diagnostic Tools
continued
Tool What it is How to run it
Array Diagnostics
Utility (ADU)
A Windows-based tool designed to run
on all Compaq systems that support
Compaq array controllers. Two main
functions of ADU are to collect all
possible information about the array
controllers in the system and to
generate a list of detected problems.
Use the information provided in “Array
Diagnostics Utility (ADU)” later in this
chapter.
Integrated
Management Log
(IML)
A log of system events, such as system
failures or nonfatal error conditions.
View events in the IML from within:
■ Compaq Insight Manager
■ Compaq Survey Utility
■ Compaq IML Viewers
The IML requires Compaq operating
system-dependent drivers. Refer to the
Support Software CD for instructions on
installing the appropriate drivers.
Compaq Inspect
Utility
The Inspect utility provides a report
detailing system information.
The Inspect utility can be run from either
the main menu of the System
Configuration Utility or the Compaq
Diagnostics Program.
BIOS Setup Utility Utility to easily configure the hardware
installed in or connected to the server.
Specifically, it can:
■ Configure PCI boards automatically
■ Manage installation of memory,
processor upgrades, and mass
storage devices such as hard
drives, tape drives, and diskette
drives
■ Store configuration information in
nonvolatile memory
■ Assist in installation of an operating
system
The BIOS Setup Utility is loaded during
POST if the F10 key is pressed. When
“F10-Setup” displays in the lower right
corner of the screen, press the F10 key
to initiate the utility.