Specifications

2-32 Compaq ProLiant ML350 Maintenance and Service Guide
To remove a processor:
1. Complete the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Remove the access panel. See “Access Panel” earlier in this chapter.
3. Push the release tabs (1) toward the center of the processor, and then gently lift the
processor (2) from the system board.
NOTE: If removing the second processor, a terminator module must be installed for proper operation.
1
1
2
Figure 2-29. Removing a processor
Reverse steps 1 through 3 to replace a processor.