Specifications

Removal and Replacement Procedures 2-29
Memory Module
To remove an SDRAM DIMM:
1. Complete the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Remove the access panel. See “Access Panel” earlier in this chapter.
3. Press outward on both latches of the DIMM (1) at the same time. This action releases the
module and pushes it partially out of the socket.
4. Lift the module (2) from the socket.
1
1
2
Figure 2-27. Removing a memory module
Reverse steps 1 through 4 to replace a memory module.