Specifications

2-26 Compaq ProLiant ML350 Maintenance and Service Guide
Expansion Board (Server Feature Board)
To remove an expansion board (Server Feature Board):
1. Complete the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Remove the access panel. See “Access Panel” earlier in this chapter.
3. Disconnect any cables connected to the expansion board.
4. If an expansion board retainer is in place, loosen the thumbscrew (1) of the expansion
board retainer, then pull the retainer (2) out and away from the chassis.
1
2
Figure 2-24. Removing the expansion board (Server Feature Board) retainer