Specifications

2-8 Compaq ProLiant ML350 Maintenance and Service Guide
Removable Media Blank
NOTE: The removable media blank must be removed from an available removable media bay to install a
storage device for the first time.
To remove a removable media blank from the front bezel:
1. Complete the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Remove the front bezel door. See “Front Bezel Door” earlier in this chapter.
3. Remove the access panel. See “Access Panel” earlier in this chapter.
4. While pushing up on the drivelock (1), push on the rear of the removable media blank
assembly.
5. Gently remove the removable media blank (2).
1
2
Figure 2-3. Removing the media blank
Reverse steps 1 through 5 to replace the removable media blank.