Specifications
Index 11
security, ASR 3-70
serial port
address conflict detected 3-18
identified 4-3
POST messages 3-18
test error codes 3-45
Server Feature Board
components, illustrated 4-4
configuration switch location and
default settings,
illustrated 4-6
identified 2-25
not properly cabled to the
system 3-15
part number 1-5
POST messages 3-15
proper installation 3-15
properly cabled 3-15
server management information cable
(SMIC), routing diagram 2-10
server setup utility, accessing 3-6
server specifications 5-1
setup password cleared 3-18
signal cable kit, part number 1-6
slot ID mismatch 3-9
slot X drive array
array accelerator memory size
change detected 3-23
capacity expansion process
temporarily disabled 3-25
controller failure 3-31
controller not supported in
systems with more than 3GB
of memory 3-25
critical drive firmware problem
detected 3-26
disk consistency initialization in
progress 3-24
drive failure 3-31
drive parameter tracking predicts
imminent failure 3-22
drive(s) disabled due to failure
during expand 3-26
new logical drive(s) attachment
detected 3-23
not configured 3-32
obsolete data found in array
accelerator 3-27
option ROM appears to conflict
with an ISA card 3-25
option ROM not programmed
correctly or may conflict with
the memory address range of
an ISA card 3-26
physical drive position change(s)
detected 3-23
ProLiant drive storage enclosure
problem detected 3-29
ProLiant storage system not
responding 3-28
recovery needed 3-33
replacement drive(s) detected OR
previously failed drive(s)
now operational 3-30
reports incorrect drive
replacement 3-34
requires system ROM
upgrade 3-25
resuming logical drive expansion
process 3-26
S.M.A.R.T. hard drive(s) detect
imminent failure 3-22
SCSI bus termination error 3-28
SCSI drive(s) not
responding 3-35
SMART SCSI hard drive detects
imminent failure 3-22
SmartStart and Support Software CD
contents 3-5
running utilities 3-5
running utilities from 3-5
snoop rules
POST messages 3-12
SRAM failure 3-12
software error, recovery from 3-68,
3-69
specifications
CD-ROM drive
access times 5-4
capacity 5-4
data transfer rate 5-4
dimensions 5-4
laser parameters 5-5
operating conditions 5-5
rotational speed 5-4
startup time 5-4
stop time 5-4
weight 5-4
diskette drive
access times 5-3
data transfer rate 5-3
height 5-3
number supported 5-3
read/write heads 5-3
size 5-3
Dual Channel Wide Ultra2 SCSI
Adapter
data transfer method 5-8
drives supported 5-8
maximum transfer rate 5-8
protocol 5-8
SCSI termination 5-8