Installation guide

5-8 Compaq ProLiant ML350 Setup and Installation Guide
For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: f-ch5 Server Configuration and Utilities.doc Last Saved On: 7/11/00 9:09 AM
SmartStart Diskette Builder
The SmartStart and Support Software CD contains a utility to generate support
diskettes in the event they are needed or the software cannot be used directly
from the SmartStart and Support Software CD. Support diskettes are
“punched-out” from data stored on the SmartStart and Support Software CD.
The support includes:
■ Array Configuration Utility
■ Operating System support
■ Diagnostic utilities
■ Server utilities
■ Erase utility
■ System and Option ROMPaq diskettes
To run the Diskette Builder, use a workstation running Microsoft Windows 95,
Windows 98, Windows NT, or Windows 2000. You also need several
1.44-MB diskettes. All data on the diskettes will be overwritten. Insert the
SmartStart and Support Software CD in the workstation drive. The CD
automatically runs the Diskette Builder utility; however, if the system does not
support the “auto-run” feature, use Windows Explorer to run
[CD-ROM DRIVE]:\DSKBLDR\DSKBLDR.EXE.
Compaq Insight Manager
Compaq Insight Manager is the Compaq application for easily managing
network devices. Compaq Insight Manager delivers intelligent monitoring and
alerting as well as visual control of your Compaq devices. Documentation for
Compaq Insight Manager is available on the Compaq Management CD in
[CD-ROM DRIVE]:\OVERVIEW.HLP.
IMPORTANT: You must install and use Compaq Insight Manager to benefit from the
Compaq pre-failure warranties on processors, hard drives, and memory modules.