Installation guide

Cabling Guidelines 4-5
For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: e-ch4 Cabling Guidelines.doc Last Saved On: 7/11/00 9:08 AM
Identifying and Connecting a Fast SCSI-2 Device
(Narrow)
Some SCSI devices require a special adapter to connect with the SCSI cable
included with your server.
Figure 4-4. 68-to-50 pin (wide-to-narrow) SCSI adapter
If you are installing a device that uses a Fast SCSI-2 interface, you must use a
68-to-50 pin SCSI adapter (spare part number 199618-001) shown in
Figure 4-4. This adapter should be installed between the 50-pin interface of the
device and the 68-pin SCSI cable connected to the SCSI connector of the
system.