Installation guide

4-4 Compaq ProLiant ML350 Setup and Installation Guide
For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: e-ch4 Cabling Guidelines.doc Last Saved On: 7/11/00 9:08 AM
Internal SCSI Component Location
Before cabling the server, note the removable media and hard drive cage
locations as shown in Figure 4-3 and Table 4-1. For additional information
about installing optional SCSI devices, refer to the documentation included
with the SCSI devices.
1
2
3
4
5
Figure 4-3. Internal SCSI components
Table 4-1
Internal SCSI Component Locations
Number Description
Removable media area
Hard-drive cage
SCSI knockouts
SCSI channel B connector
SCSI channel A connector
NOTE: The interior of the server may look different depending on the model purchased.