Installation guide

4-2 Compaq ProLiant ML350 Setup and Installation Guide
For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: e-ch4 Cabling Guidelines.doc Last Saved On: 7/11/00 9:08 AM
Identifying the Internal SCSI Components
Non-Hot-Plug Hard Drive SCSI Cable
The SCSI cable shown in Figure 4-1 is included with the non-hot-plug hard
drive server. The SCSI cable shown in this illustration supports up to four
SCSI devices and includes a terminator on the end.
Figure 4-1. Identifying the non-hot-plug SCSI cable with terminator