Installation guide

Hardware Options Installation 3-35

For use with 1-GHz or greater Intel Pentium III processor-based server models only

Compaq Confidential – Need to Know Required

Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:

Part Number: 201345-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 7/24/00 9:23 AM

Table 3-4

Processor and Processor Power Module (PPM)

Locations

Item Description

Processor slot 1

PPM socket 1

Processor slot 2

PPM socket 2

3. Press one side of the heatsink retainer clip to disengage the heatsink

from the processor socket.

4. Unhook the opposite side of the heatsink retainer clip from the

processor socket.

5. Lift up the lever on the processor socket until it releases.

IMPORTANT: The lever must be perpendicular to the system board to unlock the

processor unit.

6. Remove the processor from the processor socket.

Figure 3-36. Removing the processor from the system board

7. Reinstall the access panel.