Installation guide

Hardware Options Installation 3-27
For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 7/24/00 9:23 AM
Installing a Memory Module
The ProLiant ML350 supports PC 133-MHz Registered ECC SDRAM
DIMMs. Additional DIMMs (128, 256, 512 MB, or 1 GB) are available to
upgrade the memory. The server has four DIMM sockets located on the
system board.
DIMMs do not need to be installed in pairs and can be installed in any
sequence.
Figure 3-29. Locating DIMM sockets