Installation guide

3-20 Compaq ProLiant ML350 Setup and Installation Guide

For use with 1-GHz or greater Intel Pentium III processor-based server models only

Compaq Confidential – Need to Know Required

Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:

Part Number: 201345-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 7/24/00 9:23 AM

2. Disconnect the power cable and data cable from the back of the tape

drive.

Figure 3-22. Disconnecting the tape drive cables

3. While pushing the drivelock up, pull the drive out of the drive bay.

Figure 3-23. Releasing the tape drive

4. Remove the guide screws on the sides of the drive.

5. Install a hard drive blank into the empty drive bay.

6. Reinstall the access panel.