Installation guide

Hardware Options Installation 3-19

For use with 1-GHz or greater Intel Pentium III processor-based server models only

Compaq Confidential – Need to Know Required

Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:

Part Number: 201345-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 7/24/00 9:23 AM

5. Connect the data cable and power cable to the back of the drive.

Figure 3-21. Connecting the tape drive cables

Removing a Device from the Removable Media Bay

To remove a tape drive or other device:

CAUTION: Before removing the access panel, make sure that the server is

powered down, all cables are disconnected from the server, and the power cord

is disconnected from the grounded (earthed) AC outlet.

1. Follow the steps in “Removing the Access Panel” at the beginning of

this chapter.