Installation guide

Hardware Options Installation 3-13

For use with 1-GHz or greater Intel Pentium III processor-based server models only

Compaq Confidential – Need to Know Required

Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:

Part Number: 201345-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 7/24/00 9:23 AM

Installing and Removing a Hot-Plug Hard Drive

To install a hot-plug hard drive, first review the installation documentation that

came with the drive.

1. Follow the steps in “Opening or Removing the Bezel” to access the

hot-plug hard drive bays.

2. Slide the release latch and remove the hard drive blank .

Figure 3-14. Removing the hard drive blank

3. Slide the hard drive release latch to open the ejector lever .

Figure 3-15. Opening the ejector lever