Installation guide

3-12 Compaq ProLiant ML350 Setup and Installation Guide

For use with 1-GHz or greater Intel Pentium III processor-based server models only

Compaq Confidential – Need to Know Required

Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:

Part Number: 201345-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 7/24/00 9:23 AM

3. Press inward on the release tab and gently pull the drive out of the

drive bay.

Figure 3-13. Removing a non-hot-plug hard drive from a non-hot-plug drive

bay

4. Remove the two guide screws from each side of the drive.

5. Install a hard drive blank into the empty drive bay.

6. Reinstall the access panel.