Installation guide

3-10 Compaq ProLiant ML350 Setup and Installation Guide
For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 7/24/00 9:23 AM
6. Slide the drive into the drive bay until the rear screw clicks into place.
Fill the drive bays from right to left.
Figure 3-10. Installing a 3.5-inch hard drive
NOTE: The interior of the server may look different depending on the model purchased.
7. Connect the power cable and data cable to the back of the device.
Figure 3-11. Cabling the drives
NOTE: The interior of the server may look different depending on the model purchased.
8. Replace the drive cage door. Replace the access panel and the bezel.