Installation guide

Hardware Options Installation 3-7
For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 7/24/00 9:23 AM
Identifying Guide Screws
When installing drives, you must install guide screws to ensure the drives
correctly align in the drive cage. Compaq has provided extra guide screws.
They are located behind the side panel of the server. Some options use
5.25 M3 metric screws and some use HD 6-32 screws. The metric screws
supplied by Compaq are black.
Figure 3-6. Identifying drive guide screws
NOTE: The interior of the server may look different depending on the model purchased.